Functions and Features:

1. Problem-self-checking function
2. Many options of working ways: bi-direction card reading; one direction card reading and another no reading; one direction card reading and another freely
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read, just push the arm with little force and arm will turn. After passenger passing, arm will be held automatically. Three arms are always closed with each turning 120 degrees.
5. Unique wheeling system is adopted to ensure accurate zero holding and unholding.
6. Standard interface is convenient for connection with different readers and writers.
7. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.
8. Stable running with little noise.

Specification:

1. Power Supply: AC220V±10V ,50Hz / AC110V±10V ,60Hz
2. Power Consumption: 100W/24V
3. Temperature: -15 to 60 degrees4. Humidity: <95%, without concretion
5. Passage Width: 650mm
6. Passing Speed: 30 persons/min (normal open), 20 persons/min (normal close)
7. Arm Open/Close Time: 2s
8. Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
9. Communication Interface: RS485 (Distance: <=1200m)
10. Material: 304 stainless steel
11. Dimension: 2450×1500×2300MM

Arm Length: 600mm
12. Weight: 160kgs
13. Working Environment: Indoors or outdoors with shed
14. Arm Turning: Single direction or Bi-direction